55
5.18.2 ABS
While cornering with brake on, the vehicle may be push and lose
traction. Such pushing can be prevented using ABS function.
Move to ABP using the
DOWN
to set the brake return amount
value. The range of value is 0 to 100. The default value is 50.
When the value is 0, the brake return does not work. (In other
words, the ABS function does not work.) When the value is 50, the
brake return works to the 50% position of trigger point. When the
value is 100, the brake servo causes the brake return to the neutral
position.
■
How to Set
This function is initially inhibited (INH). Press the
SET
on Mode
and then press the
RIGHT
to change the value to ACT. Press the
SET
again to activate the function.
Move to DLY using the
DOWN
to delay for ABS. ABS starts
operating after a specified time is passed if DLY is set. The range of
DLY value is 0 to 100. The default value is 0. If the value is 0, there
is no delay. If the value is 50, the delay is about 0.75 seconds. If
the value is 100, the delay is about 1.5 seconds.
Move to CYC using the
DOWN
to set the brake pulse speed value.
The smaller value is, the faster pulse is. The range of CYC value is 1
to 30. The default value is 10.
Move to TGP using the
RIGHT
and
UP
to set the trigger point. The
range of TGP value is 10 to 100 and the default value is 10. The
value is the percentage meaning that the end point of the trigger is
100%.
Summary of Contents for TS401
Page 1: ...User Manual for 4 Channel Transmitter TS401 2 4GHz ...
Page 70: ......
