Beyond the Basics
Finding a Lost Handset
To locate a misplaced cordless handset, press
FLASH/FIND
HANDSET
on the base when the phone is in standby. All registered
handsets will beep for 60 seconds, and PAGING appears on the
handset display. To cancel paging, press any key on the found
handset or press
FLASH/FIND HANDSET
on the base.
NOTE
If the battery pack is completely drained, the
handset will not beep when paging.
Using Hold, Conference and Transfer
Placing a Call on Hold
1. During a call, press
INT’COM/HOLD
on the handset or base
to place the caller on hold. The line key (the
LINE1
or
LINE2
soft key on the handset, or
LINE1
or
LINE2
on the base) will
flash and the caller will be put on hold.
If you leave a caller on hold for more than ten seconds, the
display screen will read, HOLD.
2. To return to the party on hold:
HANDSET:
Press /
FLASH
or
SPEAKER
.
BASE:
Press
or pick up the base corded handset.
To return to the particular caller when both of Line 1 and Line
2 are put on hold, press the corresponding line key:
HANDSET:
Press the
LINE1
or
LINE2
soft key.
BASE:
Press
LINE1
or
LINE2
.
NOTES
You can only place a caller on hold for five
minutes. Once five minutes has passed, that
party’s line will be disconnected and the phone
will return to standby.
While a call is on hold, Caller ID and Call Waiting
cannot be received.
•
•
UP841BH_43-143_OM3.indd 57
12/19/2006 6:55:24 PM
