Radio Shack 43-143 Owner'S Manual Download

Page: 52 / 96

Beyond the Basics

OR
1.

HANDSET:

Press /

FLASH

SPEAKER

BASE:

Press

or pick up the base corded handset.

The phone will automatically select a free line.

To dial the number selecting a particular line:

HANDSET:

Press the

LINE1

LINE2

soft key.

BASE:

Press

LINE1

LINE2

2. Press to open the Caller ID list.
3. Use

, , or a number key (

–

) to find the Caller ID

you want to dial.

4. To add (or delete) a “1” at the beginning of the displayed

phone number, press

/TONE

. To add (or remove) the stored

area code, press

5. Press the

DIAL

soft key to dial the number.

Deleting Caller ID Records

You can delete individual Caller ID record or delete all the Caller
ID record at once.

Deleting Individual Caller ID Record

1.  When the phone is in standby, press  .
2.  Select the Caller ID record you want to delete.
3.  Press the

DELETE

soft key.

4. ARE YOU SURE? appears in the display. Select YES.

5 You will hear a confirmation tone, and DELETED! appears in

the display.

UP841BH_43-143_OM3.indd 52

12/19/2006 6:55:22 PM

Summary of Contents for 43-143

































































































Search results

Summary of Contents for 43-143

Reviews:

Related manuals for 43-143

Brands by name

Popular brands

Radio Shack 43-143, Owner'S Manual

Search results

Summary of Contents for 43-143

Reviews:

Related manuals for 43-143

Brands by name

Popular brands