Radio Shack 43-143 Owner'S Manual Download

Page: 53 / 96

Beyond the Basics

Deleting All Caller ID Records

1. When the phone is in standby, press .
2. Press the

DELETE

soft key.

3. ARE YOU SURE? appears in the display. Select YES.

4. You will hear a confirmation tone, and DELETED! appears in

the display.

NOTE

When you delete a Caller ID number, you delete it
permanently.

Using Call Waiting

If you have Call Waiting service and a second call comes in when
you are on the phone, a call waiting tone will sound.
To accept the incoming call:

HANDSET:

Press /

FLASH

BASE:

Press

FLASH/FIND HANDSET

There is a short pause, and then you will hear the new caller.
To return to the original caller:

HANDSET:

Press /

FLASH

again.

BASE:

Press

FLASH/FIND HANDSET

again.

NOTE

You must subscribe through your telephone
provider to receive Call Waiting services.

UP841BH_43-143_OM3.indd 53

12/19/2006 6:55:23 PM

Summary of Contents for 43-143

































































































Search results

Summary of Contents for 43-143

Reviews:

Related manuals for 43-143

Brands by name

Popular brands

Radio Shack 43-143, Owner'S Manual

Search results

Summary of Contents for 43-143

Reviews:

Related manuals for 43-143

Brands by name

Popular brands