Radio Shack 43-143 Owner'S Manual Download

Page: 30 / 96

The Basics

Adjusting the LCD contrast

Contrast adjusts the cordless handset and the base display
brightness. Choose from ten levels available for optimum
viewing.

Press the

MENU

soft key.

Select the HANDSET SETUP or BASE SETUP menu, and then
the LCD CONTRAST submenu.
Press

or on the four-way function key to adjust the

contrast of the LCD.
Press the

soft key. You will hear a confirmation tone.

Adjusting the Ringer, Earpiece and
Speaker Volume

Adjusting the Ringer Volume

You can choose from three ringer volume settings on the
cordless handset and base (off, low, and high). Please follow the
steps below to change the ringer volume setting:
1. When the phone is in standby, press

or on the four-

way function key.

2. Move the cursor to select LINE1 or LINE2, and then press the

soft key.

3. Press

(louder) or (softer) to adjust the ringer volume.

Adjusting the Earpiece Volume

You can choose from six volume levels for the corded/cordless
handset earpiece.
To adjust the volume while on a call, press

(louder) or

(softer).

1.
2.

UP841BH_43-143_OM3.indd 30

12/19/2006 6:55:16 PM

Summary of Contents for 43-143

































































































Search results

Summary of Contents for 43-143

Reviews:

Related manuals for 43-143

Brands by name

Popular brands

Radio Shack 43-143, Owner'S Manual

Search results

Summary of Contents for 43-143

Reviews:

Related manuals for 43-143

Brands by name

Popular brands