Radio Shack 43-143 Owner'S Manual Download

Page: 20 / 96

The Basics

Using the Interface

Reading the Cordless Handset Display

The cordless handset display uses icons to tell you the status of
your phone.

Icon

Status

Description

Talk

The privacy icon appears when
privacy mode is turned on.

Talk

The call record icon appears
while recording a conversation.

に

Talk

The mute icon appears when
you mute the handset.

Talk

The speaker icon appears when
the handset speakerphone is
in use.

Talk

This icon appears when
T-coil mode is turned on.

Standby/

Talk

The battery icon indicates the
handset battery status: empty,
low, medium, and full.

Standby

The ringer off icon indicates
that the ringer is turned off.
The numbers beside the icon
indicate the ringer status for
line 1 and line 2 respectively.

Standby/

Talk

The Line icon indicates the line
in use or the line received a
new Caller ID message (Line1
and/or Line2).

UP841BH_43-143_OM3.indd 20

12/19/2006 6:55:12 PM

Summary of Contents for 43-143

































































































Search results

Summary of Contents for 43-143

Reviews:

Related manuals for 43-143

Brands by name

Popular brands

Radio Shack 43-143, Owner'S Manual

Search results

Summary of Contents for 43-143

Reviews:

Related manuals for 43-143

Brands by name

Popular brands