82
Appendix D.
Prism
Clicker
Tool overview
Prism
Clicker
is a small tool which allows the
Prism2
software (version 2.60.02
and above) to simulate mouse clicks for third party software. It is designed to simulate
different mouse clicks on remote computer by pressing “Start”, “Stop”, “Pause”, “Resume”
and “Mark” in
Prism2
acquisition mode.
Prism
Clicker
is able to work via Serial Communication (by Bluetooth for
example) or via TCP/IP communication protocol.
Starting the tool
It is strongly recommended to start
Prism
Clicker
as an Administrator (right click
on PrismClicker.exe file and chose “Run as administrator”). Application starts minimized
creating tray icon
. User needs to configure it first, to be able to use it. There
are two different configurations, the first one is the Connection Setup and the second one is
the Click Setup. User has to run the
Prism2
software and setup the
Prism2
to work with
Prism
Clicker
before starting the Connection Setup.
Configuring the
Prism2
Prism2
can work with both Serial and TCP/IP communications at the same time.
User has to enable and configure any of those protocols that are needed for connection
with the
Prism
Clicker
application.
Go to “Remote Marking” item of “Radar” menu
Fig.C1.
Prism2
Remote Marking menu
Enable and configure connection you are going to use in the Remote Marking
dialog window:
