56
coordinates of one trace (
Trace
column will specify the number of each trace), so the
sum of rows will be equal to number of all traces in the profile. If specific trace has no
coordinates, the row will contain zeros. GPS Coordinates Table window comprises:
Deg
(Degrees Lat Long),
DegMin
(Degrees Minutes),
DegMinSec
(Degrees Minutes Seconds) and
UTM
(Universal Transverse Mercator) – allows
choosing from varies coordinate systems.
Import
– allows to import ASCII text file (*.txt) with coordinates data into the GPS
table. To import data with coordinate system differs from Degrees Minutes text file
should have properly identified coordinate system in the beginning (it may have Deg,
DegMin, DegMinSec or UTM). If text file hasn’t coordinate system identification or
it is identified with unsupported coordinate system, its data will be interpreted as
Degrees Minutes.
Export
–
export coordinate table’s data into ASCII text file (*.txt) in accordance to
selected coordinate system.
Pressing
OK
button saves coordinates of each row to the coordinates of its
corresponding trace number (it also saves UTM coordinates into each of the trace,
even if it was not in there before opening
GPS Coordinates Table
).
Output parameters –
all of the data file parameters output and its display type.
Here you may input profile length information, change permittivity value, make textual
information corrections, choose data displaying type (line scan profile or wiggle plot
profile) and the data normalization way (entire screen or each trace). Here, you may also
control profile’s auxiliary components output, such as marks and annotations, by
choosing
Show marks, Show annotations
and
Show only annotations
options.
Fig. 11.15. Profile Parameters dialog box.
