55
Color palette
– color palette editing. Any color from 24-bit palette is available in
“
Prism2
”. Color palette is used for data output in line scan mode (Fig. 10.1), as well
for the positive half-wave output when the wiggle plot mode is used (Fig. 4.2). You
may use up to ten basic colors and their relative levels for the color palette. You could
open the palette window by pressing a respective Toolbar button or by selecting
Tools/Color palette
menu option, or by clicking a left mouse button on the color
palette column located in the upper right corner of the profile window to change the
color palette.
Fig. 11.14. Palette color editing dialog box.
Following actions could be applied in appeared Palette color editing dialog box (Fig.
10.8):
o
Choose one of eight already created palettes. To do this, press
Load
button and
select palette from existing ones provided in pop-up window. Press
OK
to confirm
your choice.
o
Modify existing palettes (add, delete or edit colors). Add or delete colors by
pressing square buttons located to the right of the color palette. You may select the
required color by clicking rectangle button located to the right of the square button.
The pop-up dialog box will offer you to choose a color from the available basic
colors, as well as an option to choose the half-tones in the Define Custom Colors
dialog box. To change a level of color used in palette, point the cursor to the square
button of appropriate color. The small color square will appear under the line
connecting the color palette with the chosen color; the information window located
below the color palette will display given color threshold level value, ranging from
–127 to 127. Navigate the cursor in the small color square, press and hold left
mouse button and start moving the square up and down, changing threshold level in
correspondence with your choice.
o
To save your created palette press
Save
button and chose which one of eight
existing palettes you wish to overwrite with the new one.
GPS Coordinates Table
– current profile’s editable list of coordinates as a table with
the columns: trace number, coordinates, altitude (column quantity and input method of
each column may differ for each coordinate system). Each table’s row represents
