59
Fig.12.2. Profiles splitting wizard dialog box on the 2
nd
step.
Wizard provides different methods for the profiles splitting:
by file size (MB)
– initial profile(-s) is splitting in a row of files not bigger than the
entered size on the hard drive in MB.
by number of traces
– initial profile(-s) is splitting in a row of profiles not longer
than the entered number of traces.
by marks inside of profile
– initial profile(-s) is splitting in a row of profiles using
the its marks (from mark to mark).
The resulting files names and location are managed in the same way like in the
combining wizard (see on p. 57).
12.3. Profiles 3D alignment wizard
Profiles which are not equal in geometrical sizes (in traces and samples) hard to use
in 3D Cube representation (see Appendix C. on p. 79). There is a way to equalize traces
quantity in profiles using
Profiles 3D alignment wizard
(menu
File / Profiles 3D
aligning
).
The 1
st
step of aligning wizard is equal to the combining and splitting wizards,
where user has to add necessary profiles (see on p. 57). Aligning options are presented on
the 2
nd
step of the wizard.
