RACOM Ray2, User Manual

Page: 78 / 235

The system warning is generated when the current transfer capa-
city of radio channel is lower than the threshold set in this paramet-
er. 0 Net bitrate [Mbps]
Interruption of radio link. ticked Air link down
Corresponding user Eth link (Eth1/Eth2) on station interrupted.
NOTE: The
EthX link system alarm can only be activated if this
alarm is Enabled. When the alarm is not Enabled, the EthX link
Eth link down
alarm on Status screen is always OK regardless of the current
status of the Ethernet link.
Loss of transmit power (not applicable for RAy2-17 neither RAy2-
24). RF power fail
Alarms Config
Fig. 7.13: Menu Link settings – Alarms Config
The diagnostic system of the link monitors the operation of the unit. It generates various output of
events - system warnings and alarms. The event is always written to the system log and indicated in
the status bar and Alarms-Status screen. Some events have adjustable thresholds. Events with no
adjustable thresholds may or may not be Enabled. If they are not Enabled, the system event is not
activated even if the system status is changed. For each event you can choose whether a SNMP trap
should be sent if the event occurs.
RAy2 Microwave Link – © RACOM s.r.o. 78
Configuration