Assembly procedure:
Fig. 6.25: Bushing and connector assembly
Fig. 6.26: Bushing incl. lengthening and connector assembly
•
Put on the cable: the nut No.1, rubber sealing No.2, bushing No.3 and O-ring No.4.
•
Attach the appropriate connector No.5 to the cable.
•
Plug the connector No.5 into the RAy2 unit.
•
Screw the bushing No.3 with the sealing O-ring into the RAy2 unit.
•
Move the rubber sealing No.2 along the cable to fit in the bushing. Screw the nut No.1 on bushing
No.3.
•
(If you use extension ring No. 6 lubricate its thread with grease.)
Disassembly procedure:
•
Release the nut No.1
•
Remove the rubber sealing No.2
•
Unscrew the bushing No.3 with O-ring No.4 (and extension No.6 with O-ring No.7).
•
Remove the connector.
51
© RACOM s.r.o. – RAy2 Microwave Link
Installation
Summary of Contents for Ray2
