VID policy
This parameter is used to indicate that frames assigned with this VID can have
Layer 2 Policy actions applied to it if the port's
Policy VTU
(menu Advanced/Mon-
itoring, Policy/Policy) is enabled to do so.
Member tag
This parameters is used to indicate which ports are members of the VLAN (i.e,
with the given VID) and if these VLANs frames should be tagged or untagged,
or unmodified when exiting the port as follows:
Port is a member of this VLAN and frames are to egress unmod-
ified.
egress un-
modified
Port is a member of this VLAN and frames are to egress Un-
tagged.
egress un-
tagged
Port is a member of this VLAN and frames are to egress Tagged.
egress
tagged
Port is not a member of this VLAN. The result is that frames as-
signed with this VID can not egress this port.
not member
This parameter takes effect only if the
802.1q mode
parameter (see menu Ad-
vanced/VLAN) is set to
secure
mode.
Edit
Press the Edit button to open the configuration dialog of selected VTU database
record.
Delete
Delete the selected VTU database record.
Add entry
Add a new VTU database entry.
Flush all
Delete the whole VTU database.
Fig. 7.35: Menu Switch settings - Advanced - VTU - edit
123
© RACOM s.r.o. – RAy2 Microwave Link
Configuration
Summary of Contents for Ray2
