Fig. 7.2: Login
Rollback function
If you interrupt the connection on an operating link by entering inappropriate radio link parameters, the
original parameters will be restored after 1 minute. The connection is automatically restored.
7.2. Status bar
Fig. 7.3: Status bar 1
The Status bar is located on the upper part of the screen below the title bar. It consists of 3 fields:
•
Local
unit status (unit assigned to the IP address entered in the browser or CLI)
•
Local to Peer
Link
status.
•
Peer
unit status.
Local and Peer field displays:
•
Station name according to configuration.
•
Actual time valid for respective unit.
•
Warning or Alarm icon in case of warning or alarm.
Link field display:
•
Status of the link between both sides of the microwave link.
•
Warning icon when the link is not capable of user data transfer.
The Link status can be one of the following values:
Unit start up. The initialization is not yet finished.
UNKNOWN
Unit initialization according to valid configuration.
SETUP
Unit in operation status. Link to peer unit is not established.
SINGLE
Connection to peer unit in progress.
CONNECTING
Authorization of the peer unit in progress.
AUTHORIZING
Link is connected. Peer unit is authorized.
OK
Spectrum analyzer mode active. User data are not transferred.
ANALYZER
RAy2 Microwave Link – © RACOM s.r.o.
62
Configuration
Summary of Contents for Ray2
