Qvis Izeus hdcvi dvr User Manual Download

Page: 128 / 181

119

7.8.1.2 Video and Audio

7.8.1.2.1 Encode

The encode interface is shown as below. See Figure 7-17.

Figure 7-17

Please refer to the following sheet for detailed information:

Parameter

Function

Channel

Please select a channel from the dropdown list.

Video enable

Check the box here to enable extra stream video. This item is
enabled by default.

Code stream
type

It includes main stream, motion stream and alarm stream. You
can select different encode frame rates form different recorded
events.

System supports active control frame function (ACF). It allows
you to record in different frame rates.

For example, you can use high frame rate to record important
events, record scheduled event in lower frame rate and it allows
you to set different frame rates for motion detection record and
alarm record.

Compression

The main bit stream supports H.264. The extra stream supports
H.264, MJPG.

Summary of Contents for Izeus hdcvi dvr






















































































































































































Search results

Summary of Contents for Izeus hdcvi dvr

Reviews:

Related manuals for Izeus hdcvi dvr

Brands by name

Popular brands

Qvis Izeus hdcvi dvr, User Manual

Search results

Summary of Contents for Izeus hdcvi dvr

Reviews:

Related manuals for Izeus hdcvi dvr

Brands by name

Popular brands