background image

©

 

Copyright Qvis 

 All software and documentation rights reserved.

45

7.5.7 

DDNS settings

See Figure 29 for the “DDNS setting” interface:

Figure 29

To bind the camera with a fixed domain name using a DDNS server. Using 

a fixed domain name will prevent the need to use an IP address (that may 

change repeatedly over time) to connect to the camera.  (Refer to Appendix 

3 for detailed steps)

[Enable]:

  

 

Enable or disable DDNS  function.

[Service Provider]:  

supports 3322.org and dyndns.org. 

[User Name]:

  

 

User name registered within DDNS server.

[Password]:  

 

User password registered within DDNS   

 

 

 

server.

[Domain]:

  

 

The domain name set up by users, e.g.:    

 

 

 

test1.3322.net.

[Server URL]:

  

 

DDNS server address. When the DDNS   

 

 

 

address is the domain name, please set the  

 

 

 

DNS address in [Basic Parameters] correctly.

[Server port]:

  

 

Default value is 30000, this is the DDNS 

 

 

 

server’s port number (users are  

 

 

 

 

recommended not to change it).

Summary of Contents for EYE-4MP-FG/W





































































Reviews: