©
Copyright Qvis
Ⓡ
All software and documentation rights reserved.
49
7.5.11
Connect settings
See Figure 33 for the “Connect Setting” interface:
Figure 33
[Auto connect]:
Enable or disable active connection of the
device to the surveillance center.
[Central URL]:
The address of surveillance center (e.g.
192.168.55.99).
[Central port No.]:
The port of surveillance center (e.g. 6000).
After setting all the network parameters, click ‘Save’ to make the parameters
valid.
7.6
Storage Settings
Attention:
This section to the camera’s interface is not relevant to 4MP IP
cameras this particular guide is associated with. Please ignore this chapter.
7.6.1
Device Settings
See Figure 34 for the “Storage Device” interface:
