©
Copyright Qvis
Ⓡ
All software and documentation rights reserved.
27
7.2 Audio Setting
See
Figure 14
for the ‘Audio Setting’ interface (audio only available on
certain camera models):
Figure 14
[Enable]:
To turn IP camera’s audio on or off. When
there is no need for audio, un-tick this box to
save DSP and network resources. Audio is
disabled by default.
[Audio Input]:
Select either ‘MIC’ or ‘Line In’ input.
[Compression Type]:
Supports three types of audio compression
format:G.726, G.711A, G.711U.
[Sampling Rate]:
Supports audio sample rates of 8k and 32k.
[Input Volume]:
Adjust the device’s input volume up or down
using the slider.
[Output Volume]:
Adjust the device’s output volume up or down
using the slider.
After you set these parameters, please click ‘Save’ to make them valid.
