©
Copyright Qvis
Ⓡ
All software and documentation rights reserved.
38
7.4.3 Smart Control - Not available for these camera models
See Figure 22 for the ‘Smart Control’ Interface:
Figure 22
[Smart Control Switch]:
Performs preset movements if camera has
PTZ capabilities
.
[Preset - Alarm Open]:
camera performs
preset movement when alarm is triggered
[Preset - Alarm Close]:
camera performs
preset movement after alarm stops
[Preset - Clear Fault]:
camera performs
preset movement if a movement fault occurs
[Smart Low Light]:
Select
‘Open’
to enable function or
‘Close’
to
disable.
7.5 Network Settings
7.5.1 Basic Settings
See Figure 23 for the “Basic setting” interface:
Figure 23
