©
Copyright Qvis
Ⓡ
All software and documentation rights reserved.
36
[Close]:
Switches Intelligent video streaming quality switching
feature off.
[Auto]:
Sets the intelligent video quality switching mode to
automatic. You will be able to set motion detection
sensitivity levels to either Low/Normal/High. Video
streaming quality is raised to full quality when motion
alarm is triggered. When no motion is detected the
streaming quality level is lowered to provide more
bandwidth on the network the camera is connected to.
Please
see
Chapter 7.6 Alarm Setting
to find out
how to setup camera to send alarm notification alerts to
a designated email address.
[ROI]:
Region Of Interest; select this option and you will be
able to create up to 4 regions of interest in the video
window, which when movement is detected within, the
camera’s alarm is triggered.
[ROI Set]:
To set up to 4 regions of interest; hold cursor
over the video window, to the top right corner of the
region of interest, hold down left mouse button and
drag across video window to expand the blue box to the
point where the region of interest ends, then release left
mouse button (see figure 20 to see blue box region of
interest example). Now whenever movement is detected
within the box that has been created the camera’s alarm
will be triggered.
[Clear]:
Delete the all regions of interest from the video
window.
After you have set these parameters, please click ‘Save’ to make them valid.
