©
Copyright Qvis
Ⓡ
All software and documentation rights reserved.
34
- IR Detection:
for this mode, the photo-
resistor will detect the LUX value. To suit
different infrared light Arrays, we support 3
kinds of working modes: 1 (low level mode).
2 (high level mode). 3 (auto detection mode),
when the device is powered on, camera will
automatically detect light levels and power
up
the IR light array when light levels
are too low.
- Black-color:
The video goes from black &
white to color when sufficient light levels are
detected
-
Color-black:
The video goes from color to
Black-White when low light levels are
detected.
- ICR:
Infrared Correction option; select Low Level
when
strength of IR light is low, and select High
Level when
the strength of IR light is too high.
-
IR:
Set IR LED low light detection and illumination
feature to either automatically come on when low light
levels are detected (Auto), turn off feature (Close), or
keep feature on at all times (Open).
- IR Direction:
Select either High Level or Low level.
[Advanced]:
-
Rotation:
supports 90 degree and 270 degree
rotation.
-
Exposure Time:
Set the shutter value to control
exposure time.
-
WB
: You can choose either Manual WB or AWB mode
to adjust white balance. (AWB is the default).
-
AntiFogging:
Set anti fogging function for when the
density of environmental fog is high, the camera will
change the brightness and contrast to improve the
quality of image.
- AntiFalseColor:
Set anti false color function, which
will
correct the high color frequencies to true
color.
- Image Stabilizer:
If camera is situated in a location
where there is high vibration, you can set this option to
‘Open’.
