©
Copyright Qvis
Ⓡ
All software and documentation rights reserved.
17
9. Set the camera’s IP address, Gateway, and Subnet mask to match
appropriate LAN range, and click ‘OK’ to set.
5. Connect an Ethernet cable from a PC or Laptop to an Ethernet port
within the same network.
6.
Open Internet Explorer and enter one of the camera IP addresses in to
the address bar.
7. Log in with Username: admin Password: admin
8. Select Config on the top of the web page.
9. Select Network.
10. Change the HTTP Port to 81 and the ONVIF Port to 80.
11.
Save these settings.
12.
Restart the NVR when all cameras have been modified.
