©
Copyright Qvis
Ⓡ
All software and documentation rights reserved.
13
8. Set the camera’s IP address, Gateway, and Subnet mask to match
appropriate LAN range, and click ‘OK’ to set.
6.
On the ‘IP cameras: Setup, Add, Remove and Rename’ section to
the NVR, add in the IP address of the CCTV’s network into the ‘Start
IP’ field. Change the last digit to ‘1’. Add the same IP address into
the ‘End IP’ field but this time change the last digit to ‘255’. Click the
‘Search’ button.
7. The NVR will search for cameras within this IP address range and
display them in the list below. Double click on the cameras found to
connect them with the NVR.
