©
Copyright Qvis
Ⓡ
All software and documentation rights reserved.
41
7.5.4
UPNP settings
See Figure 26 for the “UPNP Setting” interface:
Figure 26
Auto-mapping of port; when the IP camera is connected to a router with the
UPNP function enabled, the router will automatically map the port, using the
UPNP settings, to the public network. Manual port mapping by the users will
not be necessary.
[Network Card]:
Select the type of network input card that will
connect to the UPNP router.
[Mode]:
Designate mode and auto mode. Designate
mode means to specify the data mapping
and web mapping ports to the router. Auto
mode allows for the data mapping and web
mapping ports to be set up by the router.
[Server URL]:
IP address of the router with UPNP function.
[Data port map No.]:
Data mapping port of user-specified device
on the router (works only under specified
mode).
[Web port map No.]:
Web mapping port of user-specified device
on the router (works only under specified
mode).
