Technical Manual
HDFS-550/551/552 Frame Synchronizer Cards
Publication 81-9059-0606-0
5-6
Main Menu Option
Sub-Menu Option & Instructions for Changing Settings
Rotate
A4 knob
to increase or decrease the Tone Gen 4
dBFS
.
Embed Enable
•
On
•
Off
Rotate
A1 knob
to switch between
On
and
Off
.
5.3 RCP-503 Remote Control Panel (Audio)
Figure 12: RCP-503 Express Remote Control Panel
After powering up the RCP-503 control panel and selecting the HDFS-55X card to be configured, press the
Audio
button and the control panel displays the
Audio Config
menu screen. From here, you can step through
a series of screens offering options for configuring the card’s
Audio
settings.
The two tables below present easy-to-use formats for configuring an HDFS-55X card’s audio options using a
RCP-503 Remote Control Panel. The first table is for the HDFS-550 card and the second table is for the
HDFS-551 and HDFS-552 cards. The tables provide instructions on what knobs to use to set each option.
Configuring Audio Settings on HDFS-550 Card
From the Configuration screen, press the small square button next to AdjacentAudBrd and the following
screen example appears:
FS-550
Adjacent DAS Audio Board
DeEmbed to DAS
Grp1
Embed DAS Audio
None
•
Rotate blue knob immediately below DeEmbed to DAS to switch the setting between None, Grp1,
Grp2, Grp3, and Grp4.
•
Rotate blue knob immediately below Embed DAS Audio to switch the setting between None, Grp1,
Grp2, Grp3, and Grp4.
Note
: A message may appear in the middle of the screen indicating that the Embedded DAS Audio will
override local Audio.