background image

 

Technical Manual

HDFS-550/551/552 Frame Synchronizer Cards

 

Publication 81-9059-0606-0 

 

   

4-14

 

Step 

Action 

Changing Alias Name 

To change your card’s 

Alias Name

, press the small button next to 

Name Card

 (top button 

right-hand side of the screen).  

 

The name of the card appears in the middle of the screen in big letters/digits 
(Example: FS-552). 

 

Two options used in setting a new 

Alias Name

 appear in the lower, left-hand corner 

of the screen—

Change Position

 and 

Change Letter

 

Note

: A card name can contain up to eight (8) letters/digits. 

Rotate blue knob immediately below 

Change Position 

to move left or right through the 

letters/digits of the card’s current name.  
 

Note

: The letter that will be changed is displayed in white. The other letters are blue. 

After selecting a letter/digit of the current name that you wish to change, rotate blue knob 
immediately below 

Change Letter

 until a selected letter/digit is displayed. 

Repeat steps 3 and 4 until a new name has been selected. 

Press the small button next to reset(top button on the right hand side of the screen) to reset 
the alias back to the factory default 

 

Reset Procs (Reset the Proc-Amp) 

Choose this option to reset your HDFS-55X card’s Video Processing Amplifier (Proc-Amp) Control settings. 

 

Gain 

 

Black Level 

 

Chroma Level 

 

NTSC Hue 

 
 

Step 

Action 

With the control panel’s main menu screen displayed, the Proc-Amp settings appear along 
the bottom of the screen and the blue knobs below the screen are used for changing the 
settings. Rotate a blue knob below one of the four settings (GAIN, BLACK, CHROMA, 
HUE) to change the setting. 
 

Note

: The four Proc-Amp settings are always displayed along the bottom of the main menu 

screen.  

If you wish to return the Proc-Amp settings to their default values, press the small button 
next to 

Reset Procs

 (bottom left-hand side of the screen). 

 

Summary of Contents for HDFS-550




















































Reviews: