Technical Manual
HDFS-550/551/552 Frame Synchronizer Cards
Publication 81-9059-0606-0
4-13
Input Cfg (Input Configuration)
Choose this option to select the input you want to use—
Input 1
or
Input 2
:
Step
Action
1
From the control panel’s main menu screen, press the small button next to
Input Cfg
(second button down from top on left-hand side of screen).
2
Press the small button next to
InputSel
(top button on left-hand side of screen) to switch
between
Input-1
and
Input-2
.
3
Rotate blue knob immediately below
VidLossAction
at the bottom of the screen to select a
preferred option when there is a loss of video to the card. The following options are
offered:
•
Off
•
Freeze
•
Black
•
Timeout
•
Switch Input
Card Info
Choose this option to determine the following about your HDFS-55X card or change its settings:
•
What is the specific
Model
of your HDFS-55X card?
•
What are the release dates for your card’s
CPU and FPGA Loads
?
•
Change your card’s
Alias Name
.
•
Reset The Card’s alias
Note
: Each HDFS-55X card has a default name assigned at the factory. You can assign an alias name to a
card and that name is stored on the card in non-volatile flash memory. If a card is moved to a new slot or
frame, the card retains the selected alias name.
Step
Action
Verifying Model and Loads
1
From the control panel’s main menu screen, press the small button next to
Card Info
(third
button down from top on left-hand side of screen).
The following is an example of information pertaining to
Model
and
Loads
displayed in the
center of the screen upon selecting
Card Info
.
CARD INFO (Model FS-552)
c1:0.1.4.6 2006/11/28 u1:v103006_1649
a1:2006/08/04 v1:2006/11/01
v2:2006/11/22 v3:2006/12/18
