Technical Manual
HDFS-550/551/552 Frame Synchronizer Cards
Publication 81-9059-0606-0
5-9
•
You will note that the numbers in the next cell (
Bank 2
) to the right of the one you are working in
will change to a higher or lower channel number depending on what you set up for
Bank 1
.
•
Repeat this process for Bank 2, Bank 3, and Bank 4.
Cfg (Configuration)
From the main menu screen, press the small square button next to
Cfg
(lower right-hand side of screen).
The following is an example of the screen that appears:
Input Status
FS-552
Select Sources
Tone Gen
Audio Configuration
Lip-Sync ALC
Embed Enab
ON
AdjacentAudBrd
Input Status
From the Configuration screen, press the small square button next to
Input Status
and the following screen
example appears providing
Audio-In
information for specific groups:
Audio-In
Status
DEmbd
Grp1: No-Input No-Input No-Input No-Input
DEmbd
Grp2: No-Input No-Input No-Input No-Input
DEmbd
Grp3: No-Input No-Input No-Input No-Input
DEmbd
Grp
4: No-Input No-Input No-Input No-Input
AES-in: No-Input
No-Input
Tone Gen
From the Configuration screen, press the small square button next to
Tone Gen
and the following screen
example appears:
Freq
FS-552
Level
Audio Tone Generators
Set
Frequencies
TG-1
400 Hz
TG-2
500 Hz
TG-3
600 Hz
TG-4
800 Hz
The screen default shows the
Freq
(frequency) for each
Tone Generator
(TG).
•
Rotate blue knob immediately below TG-1, TG-2, TG-3, or TG-4 to increase or decrease the
frequency for that specific
Tone Generator
.
