QuStream HDFS-550 Technical Manual Download Page 2 | Manualshive

Page: 2 / 51

background image

Technical Manual

HDFS-550/551/552 Frame Synchronizer Cards

Publication 81-9059-0606-0, Rev. A

i

Customer Support

Fortel DTV hopes this manual provides answers for nearly all your questions, but if it does not, please call us in Atlanta,
Georgia USA.

Voice: +1 770-806-0234
Fax: +1 770-806-0244

Fortel DTV Inc.
3305 Breckinridge Blvd. - Suite 118
Duluth, GA 30096-4932
USA

http://www.forteldtv.com

Copyright © 2007 Fortel DTV Inc. All rights reserved. Printed in U.S.A.

Fortel DTV products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published materials. Specification and price change privileges reserved. Fortel DTV
Inc., Fortel DTV and the Fortel DTV logo are registered trademarks. Integrity, DTM, Dynamic Threshold Modification
and Dual Band Processing are trademarks of Fortel DTV Inc.

The content of this manual is furnished for informational use only, is subject to change without notice, and should not
be construed as a commitment by Fortel DTV. Fortel DTV assumes no responsibility or liability for any errors,
omissions, or inaccuracies that may appear in this publication.

«
1
2
3
4
...
»

Summary of Contents for HDFS-550




















































Reviews:

No comments

Related manuals for HDFS-550

Brand: Dave Smith Instruments Pages: 106

Brand: Korg Pages: 236

Brand: Ekssperimental Sounds Pages: 4

Infernal Noise Machine

Brand: flight of harmony Pages: 24

Brand: SOMA Pages: 14

S08 Voice Editor

Brand: Yamaha Pages: 32

Brand: Yamaha Pages: 66

Brand: 1010music Pages: 2

Bitbox Micro 1.0

Brand: 1010music Pages: 2

Brand: Random*Source Pages: 4

Brand: Yamaha Pages: 19

Brand: Starling Technologies Pages: 7

Brand: LeafAudio Pages: 3

Brand: LeafAudio Pages: 7

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands