Technical Manual
HDFS-550/551/552 Frame Synchronizer Cards
Publication 81-9059-0606-0
5-7
Configuring Audio Settings on HDFS-551 and HDFS-552 Cards
The following is an example of the RCP-503’s main menu screen for audio configuration.
Grp-1<
Phase
Grp-2
FS-552
Mute
Grp-3
Audio Output Levels
Bank Gain
Grp-4 Embed
Grp-1
Cfg
Ch-01
0.0 dB
Ch-02
0.0 dB
Ch-03
0.0 dB
Ch-04
0.0 dB
Switching between channel groups
Grp-1 (Channels 1-4)
Grp-2 (Channels 5-8)
Grp-3 (Channels 9-12)
Grp-4 (Channels 13-16)
•
Press the small square button next to Grp-1, Grp-2, etc. and the corresponding set of channels appears
along the bottom of the screen.
Changing 0.0 dB setting
•
With Grp-1 selected, rotate blue knobs to change
0.0 dB
for Ch-01, Ch-02, Ch-03, or Ch-04.
•
With Grp-2 selected, rotate blue knobs to change
0.0 dB
for Ch-05, Ch-06, Ch-07, or Ch-08.
•
With Grp-3 selected, rotate blue knobs to change
0.0 dB
for Ch-09, Ch-10, Ch-11, or Ch-12.
•
With Grp-4 selected, rotate blue knobs to change
0.0 dB
for Ch-13, Ch-14, Ch-15, or Ch-16.
Phase
•
With Grp-1 selected, press the small square button next to
Phase
.
o
The settings under Ch-01–Ch-04 along the bottom of the screen change from
0.0 dB
to
Normal
.
o
Rotate blue knob below any one of the channels and the channel setting switches back and forth
between
Normal
and
Invert
.
•
To repeat the process for Grp-2, press the small square button next to Grp-2. Ch-05–Ch-08 now
appear on the screen.
•
Repeat this process for Grp-3 and Grp-4.
Mute
•
With Grp-1 selected, press the small square button next to
Mute
.
o
The settings under Ch-01–Ch-04 along the bottom of the screen change from
0.0 dB
to
Off
.
o
Rotate blue knob below any one of the channels and the channel switches back and forth between
Off
and
On
.
