Circuit Slices, LLC
Sample & Noise User Manual
CS019
CS019-UM v2.0| www.circuitslices.com
1
The Circuit Slices
Noise
is a dual-function module for Eurorack-compatible synthesizers.
Packed in a narrow panel is a classic analog ‘sample & hold’ circuit and an analog noise source with
three outputs – white, pink, and low frequency noise.
Specifications for the CS019 Noise
Noise output level: Factory set to about +/- 5V (10Vpp) User Adjustable from +/- 10V to 0V
Noise output bands
White (flat-band)
Pink (low-pass filtered to 3dB/octave for a less ‘bright’ or muffled noise signal.)
LF (very low, non-periodic ‘frequency’ near 8 Hz. Useful as a random CV.)
Noise source: amplified transistor junction noise
S&H CLOCK trigger level: >1V (any level greater than 1V)
The S&H circuit samples and outputs voltage levels in the +/- 10V range.
Connections: Standard 3.5mm jacks
Depth: 37mm
Panel width: 4 HP
Power required: +12VDC @ 20mA, -12DC @ 17mA, using a standard Eurorack 10-pin power connection
Features
for CS019 Noise
Classic analog ‘sample & hold’ and noise circuits in a narrow 4 HP module
Three noise outputs – white and two filtered
Adjustable noise output level
Low cost, due to modern surface-mount manufacturing production
DIY expansion option for the use of an internal clock source
Low power consumption (20mA or less per supply)
Includes power cable and case screws
