OPERATING INSTRUCTIONS
/ HOW TO REMOVE AND LOAD EACH RESOURCE
82
E
MosaiQ 125 - User Manual - November 2020 - Reference n°: MMSURM.0010.02
3 - Remove the stopper from the canister level sensor hole.
(removing the stopper of the canister level sensor hole)
4 - Plug in the level sensor connector and insert the liquid waste connector into the
canister, until a click is heard.
Click !
(plugging in the liquid waste level sensor)
7.3.11
REMOVING THE WATER CANISTER
This section explains how to remove the water canister from the
MosaiQ 125
. The water
canisters are located in the w
ater drawer
. The w
ater drawer
can be opened and closed
manually. The users can open and close this compartment when the
MosaiQ 125
is in
operation if a canister needs to be replaced or refilled.
To remove the water canister:
-
1
Tap on the
Resources
icon in the navigation bar.
-
2
Tap on the
System Liquid
area to check the percentage of remaining volume in each
canister.
2
1
(system liquid resources area)
