QUOTIENT MOSAIQ 125 User Manual Download Page 81

Page: 81 / 173

OPERATING INSTRUCTIONS

/ HOW TO REMOVE AND LOAD EACH RESOURCE

MosaiQ 125 - User Manual - November 2020 - Reference n°: MMSURM.0010.02

8 - Remove the canister.

9 - Leave the connectors in the canisters drawer.

(removing of the liquid waste canister)

10 - Open the canister screw caps.

11 - To empty the waste canister, tip it on its side gently.

12 - Close the screw caps.

WARNING

Risk of injury

While emptying the liquid waste canister wear protective glasses
and gloves.

7.3.10

LOADING LIQUID WASTE CANISTER

This section explains how to load the liquid waste canister into the

MosaiQ 125

. The liquid

waste canister is located in the waste drawer. The liquid waste drawer can be opened and
closed manually when the

MosaiQ 125

is in operation.

1 - Open the drawer.

(opening of the waste drawer)

2 - Insert the empty canister.

(inserting of the empty liquid waste canister)

Summary of Contents for MOSAIQ 125














































































































































































Search results

Summary of Contents for MOSAIQ 125

Reviews:

Related manuals for MOSAIQ 125

Brands by name

Popular brands

QUOTIENT MOSAIQ 125, User Manual

Search results

Summary of Contents for MOSAIQ 125

Reviews:

Related manuals for MOSAIQ 125

Brands by name

Popular brands