PRIOR TO USE
/ EQUIPMENT OVERVIEW
20
MosaiQ 125 - User Manual - November 2020 - Reference n°: MMSURM.0010.02
3.2.4
MOSAIQ QUALITY CONTROLS
Quality Controls (QC) are used to ensure that disease screening is performed as intended.
NOTICE
Perform regular quality control of the
MosaiQ 125
at least once
daily and as per laboratory and or regional specific requirement.
Laboratories must validate their own quality control method for
the assays performed by MosaiQ.
Please, refer to
chapter 9
of this manual.
3.2.5 SAMPLES
NOTICE
For detailed information about sample preparation please follow
the instructions for use for MosaiQ SDS magazines.
To load samples please refer to
chapter 8.3
of this manual.
(illustration of a filled sample tube)
3.2.6 SAMPLE
RACKS
Sample tubes are loaded onto the
MosaiQ 125
in MosaiQ sample racks. Twelve sample
tubes can be loaded onto one rack, and in turn, ten racks can be inserted into the
MosaiQ 125
. In total 120 samples can be loaded at any one time.
During each run, the
MosaiQ 125
associates the barcode of each tube with a corresponding
barcode on the rack.
To identify the sample rack, the
MosaiQ 125
needs to read the code label (near the handle)
of the rack.
(sample rack with sample tubes)
“% A”
stands for standard rack
Table 1
The
MosaiQ 125
accepts uncapped tubes.
Please refer to the list of appropriate sample tubes at
chapter 8.11
. The minimum fill volume
for routine samples shall be ≥ 500 µl.
NOTICE
Please consult our catalog for tube size adapters and contact
your local technical representative for the appropriate
MosaiQ 125
configuration.
