QuickLabel QL-30, User Manual

Page: 43 / 158

Loading Media
QL-30/60 User Guide 43
Loading Fanfold Media
Figure 12:
Feed path of fanfold media
1
Turn ring (2) counterclockwise, so that the arrow points to the unlock symbol, and thus
release the margin stop (1).
2
Move the margin stop(s) (1) in such a position that:
• QL-30, QL-60, QL-30P, QL-60P - the media can pass between the margin stop and the
chassis.
• QL-30M, QL-60M, QL-30MP, QL-60MP - the media can pass between the two margin
stops.
3
Position media stack (4) behind the printer. Ensure that labels on the strip are visible from
above.
4
Guide the media strip over the roll retainer (3) to the print unit.
5
Move the margin stop (1) against the media strip until chassis (5) and margin stop (1) or
both margin stops touch the media strip without clamping or bending it.
6
Turn ring (2) clockwise, so that the arrow points to the lock symbol, and thus fix the margin
stop (1) on the roll retainer (3).
7
Insert media strip into printhead.
See “Inserting the Media Strip into the Printhead” on page
38.
8
Set the label sensor.
See “Setting the Label Sensor” on page 39.
6
1
2
3
4
5