QuickLabel QL-30, User Manual

Page: 23 / 158

Installation
QL-30/60 User Guide 23
Connecting the Device
The standard available interfaces and connectors are shown in Figure 3.
Connecting to the Power Supply
The printer is equipped with a wide area power unit. The device can be operated with a supply
voltage of 230 V~/50 Hz or 115 V~/60 Hz without adjustment.
1
Check that the device is switched off.
2
Plug the power cable into the power connection socket (28).
3
Plug the power cable into a grounded socket.
Connecting to a Computer or Computer Network
Attention: Inadequate or no grounding can cause malfunctions during operations. Ensure that
all computers and cables connected to the label printer are grounded.
1
Connect the label printer to a computer or network by a suitable cable.
For details of the configuration of the individual interfaces, refer to
“Connecting Label
Printer to Computer” on page 69
.
Switching on the Device
When all connections have been made:
1
Switch the printer on at the power switch (27).
The printer performs a system test, and then shows the system status Ready in the display
(10).