QuickLabel QL-30 User Manual Download Page 117

Page: 117 / 158

Diagnostic Functions

QL-30/60 User Guide

117

6) Confirm the selection. The .png file will be stored in the root of the storage device.

Figure 43:

Saved print image

Save System Log

Note:

Access only with external storage device!

The function Save system log allows you to store several system files packed to a .zip file to an
external storage device (SD card, USB memory module) installed on the printer.

1) Insert SD card or USB memory module.

2) Start menu.

3) Select Diagnostics > Save system log.

4) Select the external storage device.

5) Enter a file name.

The predefined name is composed of the identifier “sys”, date, clock time and the suffix
“.png”, but may also be altered.

Summary of Contents for QL-30































































































































































Search results

Summary of Contents for QL-30

Reviews:

Related manuals for QL-30

Brands by name

Popular brands

QuickLabel QL-30, User Manual

Search results

Summary of Contents for QL-30

Reviews:

Related manuals for QL-30

Brands by name

Popular brands