QuickLabel Kiaro! 50 User Manual Download Page 43

Page: 43 / 136

Introduction

Kiaro! 50 User Guide

Switching the Printer On and Off

Switching the Printer On

Press the power key.

The Status LED will blink (green), and then light up.

Note:

When the printer is in sleep mode, press the power key to return the printer

to online mode. The printer will also wake up from sleep mode automatically as
soon as it starts receiving a print job.

Switching the Printer Off

Make sure the printer is not operating.

When the Status LED is blinking (green), the printer is operating. Make sure the
Status LED lights up (green) before turning off the printer.

Press and hold the Power key until the Status LED goes out.

•

When the Power LED stops blinking, the printer is turned off.

Summary of Contents for Kiaro! 50









































































































































Search results

Summary of Contents for Kiaro! 50

Reviews:

Related manuals for Kiaro! 50

Brands by name

Popular brands

QuickLabel Kiaro! 50, User Manual

Search results

Summary of Contents for Kiaro! 50

Reviews:

Related manuals for Kiaro! 50

Brands by name

Popular brands