background image

Troubleshooting

Kiaro! 50 User Guide

91

Are the port settings correct?

Confirm the port settings with the follow-
ing steps:

1

Click on Devices and printers from 
the Windows Start menu.

For Windows 8: Move the pointer to 
the top right or lower right corner of 
the screen to show the “charm bar” 
and tap or click Settings, Control 
Panel, Hardware and Sound, and 
Devices and Printers in order.

2

Right-click the printer icon and 
select Printer Properties. The 
properties window will appear.

3

Click on the Ports tab and confirm 
that the port is correctly selected.

For USB connection: USBnnn 
(“nnn” represents numbers)

For network connection: SCnnnnnn 
(“nnnnnn” represents numbers)

4

If the setting is incorrect, set it again 
correctly. If the port to be used is not 
available, uninstall the printer driver 
and install it again.

Is the test pattern printed?

Try printing a test pattern from the Test 
Print tab in the Maintenance Utility.

If the test pattern is printed, check the 
application software settings, operation 
method, and print data content.

If the test pattern is not printed, contact 
QuickLabel Support.

Are there problems occurring with the 
computer?

Print after restarting the computer. 
Delete any print jobs left over when 
starting.

Is “no ink” displayed even though an ink 
tank with remaining volume is installed?

Reinstall the ink tank.

Check Point

Solution

Summary of Contents for Kiaro! 50









































































































































Reviews: