Quantum Trinity F90+, User Manual

Page: 80 / 168

80 Trinity F90+ user manual
7.5 UPDATES & SETTINGS
7.5.1 DataLink settings
The frequency band and the transmission power of the ground and air modems can not be changed. In order to guarantee a
connection between the UAV and the QBase modem the settable network ID and password need to match. User defined IDs
and passwords are only neccessary if you wish to fly with two UAV (see chapter 15).
The modem settings for the ground and air modem can be changed using the follo-
wing dialog:
1. Select the modem to change via the ground and air switch. The air modem can
only be accessed if the aircraft is connected via USB and the battery is plugged in
afterwards.
2. Multiple aircrafts can fly at the same time, if each ground and air modem pair has
a different ID.
Enter the target ID and click Configure to set it.
3. By using a password no other user with the same ID can access your aircraft.Enter
a password and click Set Password to set it.
4. Restore the factory settings for the slected modem by clicking Reset Modem to
Factory Settings
Air and ground modem need to have the same settings, in order for the communication
to work!