Chapter 6 Troubleshooting Guidelines
Operation Failure
Quantum|ATL PowerStor L200 Series Library User’s Guide
59
Operation Failure
6
Use the following guidelines if operation failure occurs.
Write-Operation
Failure
6
Some manual operations, if not performed correctly, may cause
write operations to fail.
For example:
•
Loading any write-protected tape cartridges when executing
write operations
•
Selecting the incorrect cartridge slot from which to initialize
operations
If an error does occur, read the OCP display to determine the
problem or call your Quantum|ATL Customer Support
representative.
Error Conditions
6
Depending on the error, the OCP may display an error message.
See appendix B,
Error Messages and Definitions
for more
information.
If unable to determine the cause of the problem, call your
Quantum|ATL customer support representative.
Power Problems
6
If the OCP display is not active or your system does not recognize
the library:
•
Verify that the power plug is secure
•
Verify with your system manager that the library configuration
is correct
If the library power is disconnected when a cartridge is in transit
between the elevator and magazine, the cartridge is moved into
the magazine slot when power is restored.
Summary of Contents for PowerStor L200
