Quantum PowerStor L200, User Manual

Page: 92 / 112

Appendix B Error Messages and Definitions
76 Quantum|ATL PowerStor L200 Series Library User’s Guide
Error Definitions
2 This section lists the error code, error type, and descriptions for the
library.
Table 27 Library
Error Definitions
Note: If an unrecoverable error occurs, the error message will
remain on the OCP until another button is pushed.
Error
Code
Error Type Description
80H
Non-error This status indicates no error has occurred.
81H
Fatal Invalid command error: indicates that the loader received an undefined
command or an invalid parameter to a command.
82H
Fatal Undefined error codes
83H
Fatal
84H
Not Fatal A cartridge is in transit after a reset or power up. This error will occur
whenever a power-cycle or reset occurs during a move. The loader
controller will insure that the cartridge is fully loaded onto the CHM and
then will proceed with power-on self-tests.
The library controller will be responsible for moving the cartridge either
to its home location, if known, or to the drive before issuing the
Extended Scan Magazine
command.
85H
Fatal Did not find pusher home position during mechanical initialization.
86H
Fatal Did not find
PUSHPOS 1
during mechanical initialization.
87H
Fatal Time-out while moving a cartridge onto or off of the CHM during
mechanical initialization.
88H
Fatal Time-out finding CHM home position during mechanical initialization.
89H
Fatal Time-out while trying to find
PUSHPOS 2
during mechanical initialization.
† Retry: the command should be reissued or retried
‡ See description for more details on the cause for this error, and how to recover from the error