Quantum PowerStor L200, User Manual

Page: 93 / 112

Appendix B Error Messages and Definitions
Quantum|ATL PowerStor L200 Series Library User’s Guide 77
8AH
Fatal Did not leave
DRIVPOS
during mechanical initialization.
8BH
Fatal No drive handle installed, or time-out while closing the drives handle
during mechanical initialization.
8CH
Fatal Time-out during pusher test (did not leave home position).
8DH
Fatal Time-out during pusher test finding pusher home position.
8EH
Fatal Time-out during pusher test or during CHM home position leaving
pusher home position while moving, towards
PUSHPOS2
.
8FH
Fatal Undefined error code
90H
Fatal No cartridge was present in the drive during a cartridge unload.
91H
Retry
†
Time-out while attempting to find
PUSHPOS 1
. Position in front of the drive
before unloading a cartridge from drive onto the CHM.
92H
Retry
†
Time-out opening drive handle during cartridge unloads. The library
controller determines if the drive is still in unloaded state after receiving
this error code. If the drive is still in the unloaded state, reissue the
command. If the drive is not still in the unloaded state, then another
unload command must be issued to the drive prior to retrying this
command.
93H
Retry
†
Time-out attempting to find the pusher home position during a cartridge
unload.
94H
Retry
†
Time-out while moving a cartridge from the drive onto the CHM. If this
error occurs, the loader controller will try to move the cartridge back into
the drive. The receipt of this error code implies the cartridge has been put
back into the drive.
95H
Retry
†
Time-out while moving the CHM from the drive load position to the slot
position during a cartridge unloads. Reissue
Scan Magazine , followed
by
Unload
.
96H
Retry
†
Time-out finding
PUSHPOS 1
during a cartridge unload.
Error
Code
Error Type Description
† Retry: the command should be reissued or retried
‡ See description for more details on the cause for this error, and how to recover from the error