Chapter 4 Using the Library
Using Tape Cartridges
Quantum|ATL PowerStor L200 Series Library User’s Guide
45
Loading a
Cartridge
4
To load a cartridge from a magazine slot into the tape drive:
1
Press
Select
until the message
Load?
is displayed.
2
Press Enter to display the message Load Slot 0?.
3
Press Next until the desired slot number is displayed.
4
Press Enter to select the slot number.
5
Press Enter to display one of the following messages:
•
Drive is Full
A cartridge is already installed in the drive. To continue,
unload the cartridge from the full drive (see
Unloading a
Cartridge
on page 46), then perform the load function
again.
•
Slot x is Empty
There is no cartridge available in the selected slot. To
continue, select a slot that contains the cartridge using the
Next
or Previous buttons, or insert a cartridge into the
empty slot.
•
LOADING or UNLOADING or CALIBRATING COMP
The library is in the process of completing an activity.
When the activity is completed, Library Idle is displayed on
the OCP.
•
IDLE COMP
The load function is complete.
6
Take the action appropriate for the message.
During the loading process, the CHM performs several
functions and displays several messages.
After the tape cartridge is loaded, Library Idle is displayed on
the OCP.
7
Press Select to return to the main menu.
Summary of Contents for PowerStor L200
