Quantum PowerStor L200, User Manual

Page: 57 / 112

Chapter 4 Using the Library
Using the Library Door
Quantum|ATL PowerStor L200 Series Library User’s Guide 41
Opening the
Library Door
4
To open the magazine door, using the OCP:
1
Press
Select
until the message
EJECT/UNLOCK?
is
displayed.
2
Press
Next
to display the message
Eject Cartridge?
.
3
Press
Next
to display the message
Unlock Doors?
.
4
Press
Enter
to display the message
Are you sure?.
5
Press
Enter
to remove any cartridge from the drive and
display the message
Open Doors!
.
This activity can take up to three minutes if the cartridge is to
be removed from the drive and the end of data is at the end of
the tape spool. Press any other button to stop the operation.
6
Open the door using the handle.
Closing the
Library Door
4
To close the library door, push the door until it latches.
The door automatically locks after approximately five seconds.
The library automatically executes a scan magazine function.
When the scan magazine function is complete, the message
Eject/Unlock?
is displayed on the OCP. If the optional bar code
reader is present, the cartridge label bar codes are read.
Note: When the door is unlocked, the message Door
Unlocked! is always displayed. The only way to
restore library operation is to open and close the
library door.