Quantum PowerStor L200, User Manual

Page: 46 / 112

Chapter 3 Operator Control Panel
SCSI ID
30 Quantum|ATL PowerStor L200 Series Library User’s Guide
Viewing the SCSI
ID Settings
3
To view the current SCSI ID settings:
1
Press
Select
until the message
SCSI ID?
is displayed.
2
Press
Next
to enter the SCSI ID menu and display the message
View ID?.
3
Press
Enter
to view all the SCSI IDs.
4
Press
Select
to return to the main menu.
Changing the SCSI
ID Settings
3
To change the SCSI ID for the library controller:
1
Press
Select
until the message
SCSI ID?
is displayed.
2
Press
Next
to display the message
Set ID?.
3
Press
Next
to display the message
Set ID? Library?.
4
Press
Enter
to display the SCSI ID selections (0-15).
5
Press
Previous
or
Next
until the desired SCSI ID is
displayed.
6
Press
Enter
to select the SCSI ID setting.
7
Press
Select
to return to the main menu.
To change the SCSI ID settings for the tape drive:
1
Press
Select
until the message
SCSI ID?
is displayed.
2
Press
Next
to display the message
Set ID?.
3
Press
Next
to display the message
Set ID? Library?.
4
Press
Next
to display the message
Drive ID?
.
5
Press
Enter
to display the SCSI ID selections (0-15).
Note: EEROM is maintained through power cycles. SCSI ID
information that is stored in nonvolatile RAM is saved
until you manually change it. SCSI IDs do not
automatically revert to their defaults.