Quantum LTO-4 (Model B), User Manual

Page: 95 / 98

Appendix C Regulatory Compliances
Electromagnetic Compatibility (EMC) Compliances
LTO-4 (Model B) Half-Height Tape Drive User’s Guide 79
Note: Use the LTO-4 (Model B) Half-Height Tape Drive only in
equipment where the combination has been determined to be
suitable by an appropriate certification organization (for
example, Underwriters Laboratories Inc. or the Canadian
Standards Association in North America).
Also consider the following safety points:
• Install the drive in an enclosure that limits the user’s access to live
parts, gives adequate system stability and provides the necessary
grounding for the drive.
• Provide the correct voltages (+5 VDC and +12 VDC) based on the
regulation applied—Extra Low Voltage (SEC) for UL and CSA, and
Safety Extra Low Voltage for BSI and VDE (if applicable).
EU member nations CE Emissions per CISPR
22, EN55022 and
Immunity per CISPR
24, EN55024
Israel SII CISPR 22 and CISPR 24
Japan Voluntary Control Council for
Interface (VCCI)
VCCI
New Zealand Australian Communications and
Media Authority (ACMA)
AS/NZS 3548 (same as
CISPR 22)
South Korea MIC CISPR 22 and CISPR 24
Taiwan Bureau of Commodity Inspection
and Quarantine (BSMI)
BSMI EMC
certification, CNS
14338
United States Federal Communications
Commission (FCC)
Title 47: Code of
Federal Regulations,
Part 15, Subpart B
(47CFR15B),
Country Regulatory Organization Compliant to: