![background image](http://html1.mh-extra.com/html/quantum/lto-4-model-b/lto-4-model-b_user-manual_3484516030.webp)
Chapter 2 Installation Procedures
Installing the Internal LTO-4 (Model B) Half-Height Tape Drive
14
LTO-4 (Model B) Half-Height Tape Drive User’s Guide
Figure 6 Internal SCSI Drive
Interface and DC Power
Connectors
Figure 7 Internal SAS Drive
Interface and DC Power
Connectors
Connect the interface and DC power cables to the internal drive as
follows:
1
Verify that the system is shut down and the AC power cord is
disconnected from the facility AC power receptacle.
2
Depending on the interface configuration of your internal drive:
a
For the parallel SCSI internal drive:
DC power connector
68-pin SCSI cable
DC power connector
29-pin SFF-8482 SAS connector
Summary of Contents for LTO-4 (Model B)
