Chapter 2 Installation Procedures
Installing the Tabletop LTO-4 (Model B) Half-Height Tape Drive
LTO-4 (Model B) Half-Height Tape Drive User’s Guide
17
5
Registering the LTO-4 (Model B) Half-Height Tape Drive
on page 23.
Configuring the
Tabletop Parallel SCSI
Tape Drive
The factory-set default configuration of the tabletop parallel SCSI LTO-4
(Model B) Half-Height Tape Drive is:
• SCSI ID: 6
• Terminator power: enabled
IF the default parallel SCSI ID configuration is . . .
THEN you can . . .
compatible with your system
SCSI bus,
skip the following subsection and proceed to
Connecting the Tabletop
Drive Interface and AC Power Cables
on page 18.
already assigned to another device,
change the configuration of either the other device, or the LTO-4 (Model
B) Half-Height Tape Drive, as described in the following subsection.
Note:
You cannot disable terminator power on a tabletop parallel
SCSI drive.
Configuring the Tabletop Drive Parallel SCSI ID
Each device on the parallel SCSI bus must have its own unique SCSI ID.
Use the push-button SCSI ID selector switch on the drive back panel to
change the SCSI ID of the tabletop LTO-4 (Model B) Half-Height Tape
Drive (see
figure 8
).
Summary of Contents for LTO-4 (Model B)
