![background image](http://html1.mh-extra.com/html/quantum/lto-4-model-b/lto-4-model-b_user-manual_3484516024.webp)
Chapter 2 Installation Procedures
Installing the Internal LTO-4 (Model B) Half-Height Tape Drive
8
LTO-4 (Model B) Half-Height Tape Drive User’s Guide
Unpacking and
Inspecting the Drive
Although each LTO-4 (Model B) Half-Height Tape Drive is inspected and
carefully packaged at the factory, damage can occur:
• In shipment
• When being unpacked
Observe the handling precautions listed in
Handling Precautions and
Installation Guidelines
and carefully unpack and inspect the LTO-4
(Model B) Half-Height Tape Drive as follows:
1
Visually inspect the shipping container and notify your carrier
immediately of any damage.
2
Place the shipping container on a flat, clean, stable surface and
carefully remove the contents.
3
Visually inspect the LTO-4 (Model B) Half-Height Tape Drive and
notify your Quantum representative immediately of any damage.
4
Always save the shipping container and packing materials for any
future reshipment.
Installing the Internal LTO-4 (Model B) Half-Height
Tape Drive
To install the internal LTO-4 (Model B) Half-Height Tape Drive, complete
the following procedures in the order presented:
1
Depending on the interface configuration of the drive:
IF the drive interface is . . . THEN . . .
parallel Small Computer
System Interface (SCSI),
proceed to
Configuring the
Internal Parallel SCSI Tape Drive
in
the following subsection to
configure the parallel SCSI ID and
bus terminator power.
Summary of Contents for LTO-4 (Model B)
